My Quote Request
5985-01-097-2043
20 Products
4112P
ATTENUATOR,FIXED
NSN, MFG P/N
5985010972043
NSN
5985-01-097-2043
MFG
SMITHS INTERCONNECT MICROWAVE COMPONENTS INC. DBA EMC TECHNOLOGY / FLORIDA RF LABS
Description
APPLICATION DESIGN: TRANSMISSION LINE
ATTENUATION ACCURACY IN DECIBELS: NOT RATED
BODY MATERIAL: STEEL, STAINLESS
BODY STYLE: 1B ROUND, TERMINAL/TERMINALS ON OPPOSITE SURFACES
BODY SURFACE TREATMENT: ANY ACCEPTABLE
COAXIAL CONNECTOR SERIES DESIGNATION: SMA
FREQUENCY RANGE: 0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: PIN SURFACES GOLD
INPUT IMPEDANCE RATING IN OHMS: 50.0
MOUNTING METHOD: CONNECTOR
OPERATING TEMP RANGE: -55.0 TO 150.0 DEG CELSIUS
OUTPUT IMPEDANCE RATING IN OHMS: 50.0
OVERALL DIAMETER: 0.260 INCHES NOMINAL
OVERALL LENGTH: 0.320 INCHES NOMINAL
POWER RATING: 1.0 WATTS AVERAGE
RF SIGNAL ATTENUATION IN DECIBELS: 12.0
TERMINAL TYPE AND QUANTITY: 1 CONNECTOR
VOLTAGE STANDING WAVE RATIO: 1.25
VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE: 0.0 TO 18.0 GIGAHERTZ
Related Searches:
4208
ATTENUATOR,FIXED
NSN, MFG P/N
5985010972044
NSN
5985-01-097-2044
MFG
SMITHS INTERCONNECT MICROWAVE COMPONENTS INC. DBA EMC TECHNOLOGY / FLORIDA RF LABS
Description
APPLICATION DESIGN: TRANSMISSION LINE
BODY MATERIAL: STEEL, STAINLESS
BODY STYLE: 1B ROUND, TERMINAL/TERMINALS ON OPPOSITE SURFACES
BODY SURFACE TREATMENT: PASSIVATED
COAXIAL CONNECTOR SERIES DESIGNATION: SMA
CONNECTION TYPE PER FUNCTION: FEMALE INPUT AND MALE OUTPUT
FREQUENCY RANGE: 0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: PIN SURFACES GOLD
III TERMINAL MATERIAL: BERYLLIUM COPPER
III TERMINAL SURFACE TREATMENT: GOLD PLATED
INPUT IMPEDANCE RATING IN OHMS: 50.0
MOUNTING METHOD: CONNECTOR
OPERATING TEMP RANGE: -55.0 TO 125.0 DEG CELSIUS
OUTPUT IMPEDANCE RATING IN OHMS: 50.0
OVERALL DIAMETER: 0.312 INCHES NOMINAL
OVERALL LENGTH: 0.750 INCHES MAXIMUM
POWER RATING: 2.0 WATTS AVERAGE
RF SIGNAL ATTENUATION IN DECIBELS: 8.0
TERMINAL TYPE AND QUANTITY: 2 CONNECTOR
VOLTAGE STANDING WAVE RATIO: 1.15 AND 1.25 AND 1.50 AND 1.80
VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE: 0.0 TO 4.0 GIGAHERTZ AND 4.1 TO 12.0 GIGAHERTZ AND 12.1 TO 15.0 GIGAHERTZ AND 15.1 TO 18.0 GIGAHERTZ
Related Searches:
4408
ATTENUATOR,FIXED
NSN, MFG P/N
5985010972044
NSN
5985-01-097-2044
MFG
SMITHS INTERCONNECT MICROWAVE COMPONENTS INC. DBA EMC TECHNOLOGY / FLORIDA RF LABS
Description
APPLICATION DESIGN: TRANSMISSION LINE
BODY MATERIAL: STEEL, STAINLESS
BODY STYLE: 1B ROUND, TERMINAL/TERMINALS ON OPPOSITE SURFACES
BODY SURFACE TREATMENT: PASSIVATED
COAXIAL CONNECTOR SERIES DESIGNATION: SMA
CONNECTION TYPE PER FUNCTION: FEMALE INPUT AND MALE OUTPUT
FREQUENCY RANGE: 0.000 HERTZ MINIMUM AND 18.000 GIGAHERTZ MAXIMUM
III FSC APPLICATION DATA: ANTENNAS,WAVEGUIDES,AND RELATED EQUIPMENT
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: PIN SURFACES GOLD
III TERMINAL MATERIAL: BERYLLIUM COPPER
III TERMINAL SURFACE TREATMENT: GOLD PLATED
INPUT IMPEDANCE RATING IN OHMS: 50.0
MOUNTING METHOD: CONNECTOR
OPERATING TEMP RANGE: -55.0 TO 125.0 DEG CELSIUS
OUTPUT IMPEDANCE RATING IN OHMS: 50.0
OVERALL DIAMETER: 0.312 INCHES NOMINAL
OVERALL LENGTH: 0.750 INCHES MAXIMUM
POWER RATING: 2.0 WATTS AVERAGE
RF SIGNAL ATTENUATION IN DECIBELS: 8.0
TERMINAL TYPE AND QUANTITY: 2 CONNECTOR
VOLTAGE STANDING WAVE RATIO: 1.15 AND 1.25 AND 1.50 AND 1.80
VOLTAGE STANDING WAVE RATIO FREQUENCY RANGE: 0.0 TO 4.0 GIGAHERTZ AND 4.1 TO 12.0 GIGAHERTZ AND 12.1 TO 15.0 GIGAHERTZ AND 15.1 TO 18.0 GIGAHERTZ
Related Searches:
100C1177
ATTENUATOR,VARIABLE
NSN, MFG P/N
5985010972048
NSN
5985-01-097-2048
MFG
DAICO INDUSTRIES INC.
Description
ADJUSTMENT DEVICE TYPE AND QUANTITY: 1 MOTOR
APPLICATION DESIGN: TRANSMISSION LINE
ATTENUATION VARIATION METHOD: CONTINUOUS
BODY STYLE: 30A COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 1.750 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION: N OR SMA
FREQUENCY RANGE: 55.000 MEGAHERTZ MINIMUM AND 65.000 MEGAHERTZ MAXIMUM
III END ITEM IDENTIFICATION: RADAR SET TYPE AN/FPS-115
III FSC APPLICATION DATA: RADAR ANTENNA SUPPORT SET AND RADOMES,EXCEPT SPECIALLY DESIGNED
III OPERATING TEMP RANGE: 20.0 TO 34.0 DEG CELSIUS
IMPEDANCE RATING IN OHMS: 50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS: 0.8
MOUNTING FACILITY PATTERN: FOUR POSITION RECTANGULAR
MOUNTING FACILITY TYPE AND QUANTITY: 2 CONNECTOR AND 4 UNTHREADED HOLE
OVERALL ATTENUATION ACCURACY IN DECIBELS: -0.10 TO 0.10
OVERALL ATTENUATION RANGE IN DECIBELS: 0.0 TO 6.5
OVERALL HEIGHT: 0.500 INCHES NOMINAL
OVERALL LENGTH: 2.000 INCHES NOMINAL
OVERALL WIDTH: 2.000 INCHES NOMINAL
POWER RATING: 100.0 MILLIWATTS AVERAGE
TERMINAL TYPE AND QUANTITY: 2 CONNECTOR, COAXIAL, FEMALE AND 4 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.125 INCHES NOMINAL
VOLTAGE STANDING WAVE RATIO: 1.25
Related Searches:
952684-1
ATTENUATOR,VARIABLE
NSN, MFG P/N
5985010972048
NSN
5985-01-097-2048
MFG
RAYTHEON TECHNICAL SERVICES COMPANY LLC DBA RAYTHEON
Description
ADJUSTMENT DEVICE TYPE AND QUANTITY: 1 MOTOR
APPLICATION DESIGN: TRANSMISSION LINE
ATTENUATION VARIATION METHOD: CONTINUOUS
BODY STYLE: 30A COAXIAL TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 1.750 INCHES NOMINAL
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH: 1.750 INCHES NOMINAL
COAXIAL CONNECTOR SERIES DESIGNATION: N OR SMA
FREQUENCY RANGE: 55.000 MEGAHERTZ MINIMUM AND 65.000 MEGAHERTZ MAXIMUM
III END ITEM IDENTIFICATION: RADAR SET TYPE AN/FPS-115
III FSC APPLICATION DATA: RADAR ANTENNA SUPPORT SET AND RADOMES,EXCEPT SPECIALLY DESIGNED
III OPERATING TEMP RANGE: 20.0 TO 34.0 DEG CELSIUS
IMPEDANCE RATING IN OHMS: 50.0 INPUT-OUTPUT
INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS: 0.8
MOUNTING FACILITY PATTERN: FOUR POSITION RECTANGULAR
MOUNTING FACILITY TYPE AND QUANTITY: 2 CONNECTOR AND 4 UNTHREADED HOLE
OVERALL ATTENUATION ACCURACY IN DECIBELS: -0.10 TO 0.10
OVERALL ATTENUATION RANGE IN DECIBELS: 0.0 TO 6.5
OVERALL HEIGHT: 0.500 INCHES NOMINAL
OVERALL LENGTH: 2.000 INCHES NOMINAL
OVERALL WIDTH: 2.000 INCHES NOMINAL
POWER RATING: 100.0 MILLIWATTS AVERAGE
TERMINAL TYPE AND QUANTITY: 2 CONNECTOR, COAXIAL, FEMALE AND 4 TAB, SOLDER LUG
UNTHREADED MOUNTING HOLE DIAMETER: 0.125 INCHES NOMINAL
VOLTAGE STANDING WAVE RATIO: 1.25
Related Searches:
DCK-A14
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010972192
NSN
5985-01-097-2192
MFG
AEROFLEX / KDI INC. DIV AEROFLEX/KDI INTEGRATED PRODUCTS
Description
DESIGN TYPE: UNIDIRECTIONAL
OVERALL HEIGHT: 0.750 INCHES NOMINAL
OVERALL LENGTH: 1.250 INCHES NOMINAL
OVERALL WIDTH: 1.250 INCHES NOMINAL
POWER LOSS IN DECIBELS: 50.0
RADIO FREQUENCY RATING: 50.0 MEGAHERTZ MINIMUM AND 765.0 MEGAHERTZ MAXIMUM
TERMINAL FITTING CONTROLLING AGENCY: MINI-CIRCUITS LABORATORY DIV,SCIENTIFIC COMPONENTS CORP
TERMINAL FITTING IDENTIFYING NUMBER: TYPE NO. BNC
TERMINAL FITTING NAME: COAXIAL CONNECTORS
TERMINAL FITTING USAGE DESIGN: MAIN LINE
UNIT TYPE: COAXIAL LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 50 TO 765 MHZ
Related Searches:
SM-A-936557
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010972192
NSN
5985-01-097-2192
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
DESIGN TYPE: UNIDIRECTIONAL
OVERALL HEIGHT: 0.750 INCHES NOMINAL
OVERALL LENGTH: 1.250 INCHES NOMINAL
OVERALL WIDTH: 1.250 INCHES NOMINAL
POWER LOSS IN DECIBELS: 50.0
RADIO FREQUENCY RATING: 50.0 MEGAHERTZ MINIMUM AND 765.0 MEGAHERTZ MAXIMUM
TERMINAL FITTING CONTROLLING AGENCY: MINI-CIRCUITS LABORATORY DIV,SCIENTIFIC COMPONENTS CORP
TERMINAL FITTING IDENTIFYING NUMBER: TYPE NO. BNC
TERMINAL FITTING NAME: COAXIAL CONNECTORS
TERMINAL FITTING USAGE DESIGN: MAIN LINE
UNIT TYPE: COAXIAL LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 50 TO 765 MHZ
Related Searches:
ZFDC-20-5
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010972192
NSN
5985-01-097-2192
MFG
SCIENTIFIC COMPONENTS CORP DBA MINI CIRCUITS LABORATORIES
Description
DESIGN TYPE: UNIDIRECTIONAL
OVERALL HEIGHT: 0.750 INCHES NOMINAL
OVERALL LENGTH: 1.250 INCHES NOMINAL
OVERALL WIDTH: 1.250 INCHES NOMINAL
POWER LOSS IN DECIBELS: 50.0
RADIO FREQUENCY RATING: 50.0 MEGAHERTZ MINIMUM AND 765.0 MEGAHERTZ MAXIMUM
TERMINAL FITTING CONTROLLING AGENCY: MINI-CIRCUITS LABORATORY DIV,SCIENTIFIC COMPONENTS CORP
TERMINAL FITTING IDENTIFYING NUMBER: TYPE NO. BNC
TERMINAL FITTING NAME: COAXIAL CONNECTORS
TERMINAL FITTING USAGE DESIGN: MAIN LINE
UNIT TYPE: COAXIAL LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 50 TO 765 MHZ
Related Searches:
ZFDC-20-5BNC
COUPLER,DIRECTIONAL
NSN, MFG P/N
5985010972192
NSN
5985-01-097-2192
MFG
SCIENTIFIC COMPONENTS CORP DBA MINI CIRCUITS LABORATORIES
Description
DESIGN TYPE: UNIDIRECTIONAL
OVERALL HEIGHT: 0.750 INCHES NOMINAL
OVERALL LENGTH: 1.250 INCHES NOMINAL
OVERALL WIDTH: 1.250 INCHES NOMINAL
POWER LOSS IN DECIBELS: 50.0
RADIO FREQUENCY RATING: 50.0 MEGAHERTZ MINIMUM AND 765.0 MEGAHERTZ MAXIMUM
TERMINAL FITTING CONTROLLING AGENCY: MINI-CIRCUITS LABORATORY DIV,SCIENTIFIC COMPONENTS CORP
TERMINAL FITTING IDENTIFYING NUMBER: TYPE NO. BNC
TERMINAL FITTING NAME: COAXIAL CONNECTORS
TERMINAL FITTING USAGE DESIGN: MAIN LINE
UNIT TYPE: COAXIAL LINE
VOLTAGE STANDING WAVE RATIO AT REFERENCE FREQUENCY: 1.25 TO 1 AT 50 TO 765 MHZ
Related Searches:
654E4136-3
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972311
NSN
5985-01-097-2311
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/55-002
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-066
BEND ANGLE IN DEG: 90.0 SINGLE BEND E-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
FLANGE CONNECTING FACILITY AND QUANTITY: 6 UNTHREADED HOLE ALL FLANGES ALL CONNECTION FACILITIES
FLANGE CONNECTING HOLE DIAMETER: 0.199 INCHES MINIMUM AND 0.203 INCHES MAXIMUM ALL FLANGES ALL CONNECTION FACILITIES
FLANGE DEPTH: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE HEIGHT: 0.753 INCHES MINIMUM AND 0.756 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE WIDTH: 1.503 INCHES MINIMUM AND 1.506 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE DIAMETER: 3.110 INCHES MINIMUM AND 3.140 INCHES MAXIMUM ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C24 COVER TYPE ALL FLANGES
FLEXIBILITY: RIGID SINGLE TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
SPECIAL FEATURES: INCLUDES 4IN DIA NUTPLATE W/4 0.25IN DIA HOLES WITH WAVEGUIDE RUNNING THRU IT
STYLE DESIGNATOR: B2 BEND TYPE
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS SINGLE TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.618 INCHES MINIMUM AND 0.626 INCHES MAXIMUM
WAVEGUIDE INSIDE WIDTH: 1.368 INCHES MINIMUM AND 1.376 INCHES MAXIMUM
WAVEGUIDE LONGER OFFSET DISTANCE: 3.220 INCHES MINIMUM AND 3.280 INCHES MAXIMUM
WAVEGUIDE OFFSET DISTANCE: 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM
WAVEGUIDE OUTSIDE HEIGHT: 0.746 INCHES MINIMUM AND 0.754 INCHES MAXIMUM
WAVEGUIDE OUTSIDE WIDTH: 1.494 INCHES MINIMUM AND 1.504 INCHES MAXIMUM
Related Searches:
654E4136-5
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972312
NSN
5985-01-097-2312
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/60-002
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-066
BEND ANGLE IN DEG: 90.0 SINGLE BEND E-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 654E4136-5
FLANGE CONNECTING FACILITY AND QUANTITY: 6 THREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.750 INCHES NOMINAL ALL FLANGES
FLANGE INSIDE HEIGHT: 0.622 INCHES NOMINAL ALL FLANGES
FLANGE INSIDE WIDTH: 1.372 INCHES NOMINAL ALL FLANGES
FLANGE OUTSIDE DIAMETER: 3.125 INCHES NOMINAL ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C5 CHOKE TYPE ALL FLANGES
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.190 INCHES ALL FLANGES SINGLE CONNECTION FACILITY
STYLE DESIGNATOR: B2 BEND TYPE
THE MANUFACTURERS DATA:
THREAD CLASS: 2B ALL FLANGES SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND ALL FLANGES SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNF ALL FLANGES SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.622 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 1.372 INCHES NOMINAL
WAVEGUIDE LONGER OFFSET DISTANCE: 2.620 INCHES NOMINAL
WAVEGUIDE OFFSET DISTANCE: 2.620 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.750 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 1.500 INCHES NOMINAL
Related Searches:
654E4136-1
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972313
NSN
5985-01-097-2313
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/60-002
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-066
BEND ANGLE IN DEG: 90.0 ALL BENDS H-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 654E4136-1
FLANGE CONNECTING FACILITY AND QUANTITY: 6 THREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.750 INCHES NOMINAL ALL FLANGES
FLANGE INSIDE HEIGHT: 0.622 INCHES NOMINAL ALL FLANGES
FLANGE INSIDE WIDTH: 1.372 INCHES NOMINAL ALL FLANGES
FLANGE OUTSIDE DIAMETER: 3.125 INCHES NOMINAL ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C5 CHOKE TYPE ALL FLANGES
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.190 INCHES ALL FLANGES SINGLE CONNECTION FACILITY
SPECIAL FEATURES: 1 LEG 3.930IN LG
STYLE DESIGNATOR: B5 DOUBLE BEND TYPE
THE MANUFACTURERS DATA:
THREAD CLASS: 2B ALL FLANGES SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND ALL FLANGES SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNF ALL FLANGES SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE CENTER TO CENTER DISTANCE: 3.250 INCHES NOMINAL
WAVEGUIDE HEIGHT: 4.620 INCHES NOMINAL
WAVEGUIDE INSIDE HEIGHT: 0.622 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 1.372 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.750 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 1.500 INCHES NOMINAL
Related Searches:
654E4697-3
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972319
NSN
5985-01-097-2319
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/59-009 M3922/53-004
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-072
BEND ANGLE IN DEG: 90.0 ALL BENDS E-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 654E4697-3
FLANGE CONNECTING FACILITY AND QUANTITY: 4 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY 4 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE CONNECTING HOLE DIAMETER: 0.169 INCHES NOMINAL SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.625 INCHES NOMINAL FIRST FLANGE 0.438 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE DIAMETER: 1.625 INCHES NOMINAL FIRST FLANGE
FLANGE INSIDE HEIGHT: 0.497 INCHES NOMINAL FIRST FLANGE 0.628 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE WIDTH: 1.122 INCHES NOMINAL FIRST FLANGE 1.253 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE HEIGHT: 1.875 INCHES NOMINAL FIRST FLANGE 1.875 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE WIDTH: 1.875 INCHES NOMINAL FIRST FLANGE 1.875 INCHES NOMINAL SECOND FLANGE
FLANGE QUANTITY: 2
FLANGE STYLE: C3 CHOKE TYPE FIRST FLANGE C28 COVER TYPE SECOND FLANGE
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.164 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY
SPECIAL FEATURES: BRACKET MTD ON WAVEGUIDE;1 LEG 2.502IN LG
STYLE DESIGNATOR: B5 DOUBLE BEND TYPE
THE MANUFACTURERS DATA:
THREAD CLASS: 2B FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNC FIRST FLANGE SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE CENTER TO CENTER DISTANCE: 6.620 INCHES NOMINAL
WAVEGUIDE HEIGHT: 2.000 INCHES NOMINAL
WAVEGUIDE INSIDE HEIGHT: 0.497 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 1.122 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.625 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 1.250 INCHES NOMINAL
Related Searches:
654M2502-803
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972321
NSN
5985-01-097-2321
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/62-001 M3922/57-001
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-054
BEND ANGLE IN DEG: 90.0 SINGLE BEND E-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 654M2502-803
FLANGE CONNECTING FACILITY AND QUANTITY: 8 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY 8 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE CONNECTING HOLE DIAMETER: 0.199 INCHES NOMINAL SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.938 INCHES NOMINAL FIRST FLANGE 0.375 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE HEIGHT: 0.872 INCHES NOMINAL FIRST FLANGE 1.002 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE WIDTH: 1.872 INCHES NOMINAL FIRST FLANGE 2.002 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE DIAMETER: 3.625 INCHES NOMINAL FIRST FLANGE 3.625 INCHES NOMINAL SECOND FLANGE
FLANGE QUANTITY: 2
FLANGE STYLE: C6 CHOKE TYPE FIRST FLANGE C25 COVER TYPE SECOND FLANGE
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.190 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY
STYLE DESIGNATOR: B2 BEND TYPE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNF FIRST FLANGE SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.872 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 1.872 INCHES NOMINAL
WAVEGUIDE LONGER OFFSET DISTANCE: 2.900 INCHES NOMINAL
WAVEGUIDE OFFSET DISTANCE: 2.800 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 1.000 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 2.000 INCHES NOMINAL
Related Searches:
654M2502-805
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972322
NSN
5985-01-097-2322
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/59-009 M3922/53-004
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-072
BEND ANGLE IN DEG: 90.0 SINGLE BEND H-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
DESIGN CONTROL REFERENCE: 654M2502-805
FLANGE CONNECTING FACILITY AND QUANTITY: 4 THREADED HOLE FIRST FLANGE SINGLE CONNECTION FACILITY 4 UNTHREADED HOLE SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE CONNECTING HOLE DIAMETER: 0.169 INCHES NOMINAL SECOND FLANGE SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.500 INCHES NOMINAL FIRST FLANGE 0.438 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE DIAMETER: 1.141 INCHES NOMINAL FIRST FLANGE
FLANGE INSIDE HEIGHT: 0.375 INCHES NOMINAL FIRST FLANGE 0.628 INCHES NOMINAL SECOND FLANGE
FLANGE INSIDE WIDTH: 0.750 INCHES NOMINAL FIRST FLANGE 1.253 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE HEIGHT: 1.500 INCHES NOMINAL FIRST FLANGE 1.875 INCHES NOMINAL SECOND FLANGE
FLANGE OUTSIDE WIDTH: 1.500 INCHES NOMINAL FIRST FLANGE 1.875 INCHES NOMINAL SECOND FLANGE
FLANGE QUANTITY: 2
FLANGE STYLE: C3 CHOKE TYPE FIRST FLANGE C28 COVER TYPE SECOND FLANGE
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MANUFACTURERS CODE: 81755
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.138 INCHES FIRST FLANGE SINGLE CONNECTION FACILITY
STYLE DESIGNATOR: B2 BEND TYPE
THE MANUFACTURERS DATA:
THREAD CLASS: 2B FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND FIRST FLANGE SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNC FIRST FLANGE SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.497 INCHES NOMINAL
WAVEGUIDE INSIDE WIDTH: 1.122 INCHES NOMINAL
WAVEGUIDE LONGER OFFSET DISTANCE: 3.620 INCHES NOMINAL
WAVEGUIDE OFFSET DISTANCE: 2.020 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.625 INCHES NOMINAL
WAVEGUIDE OUTSIDE WIDTH: 1.250 INCHES NOMINAL
Related Searches:
654M2502-807
WAVEGUIDE ASSEMBLY
NSN, MFG P/N
5985010972323
NSN
5985-01-097-2323
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
(NON-CORE DATA) FLANGE MANUFACTURER PART NUMBER: M3922/59-009
(NON-CORE DATA) MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225 FED SPEC SINGLE MATERIAL RESPONSE
(NON-CORE DATA) TUBING MANUFACTURER PART NUMBER: M85/1-072
BEND ANGLE IN DEG: 90.0 SINGLE BEND H-PLANE
CROSS-SECTIONAL SHAPE STYLE: A1 INTERNAL, RECTANGULAR EXTERNAL, RECTANGULAR
FLANGE CONNECTING FACILITY AND QUANTITY: 4 THREADED HOLE ALL FLANGES SINGLE CONNECTION FACILITY
FLANGE DEPTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE DIAMETER: 1.625 INCHES NOMINAL ALL FLANGES
FLANGE INSIDE HEIGHT: 0.493 INCHES MINIMUM AND 0.501 INCHES MAXIMUM ALL FLANGES
FLANGE INSIDE WIDTH: 1.118 INCHES MINIMUM AND 1.126 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE HEIGHT: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE OUTSIDE WIDTH: 1.860 INCHES MINIMUM AND 1.890 INCHES MAXIMUM ALL FLANGES
FLANGE QUANTITY: 2
FLANGE STYLE: C2 CHOKE TYPE ALL FLANGES
FLEXIBILITY: RIGID ALL TUBING SEGMENT
III END ITEM IDENTIFICATION: 5840-01-046-7622,ELECTRONIC WARFARE TRAINING SET,AN/MST-T1
MATERIAL: ALUMINUM ALLOY 6061 ALL TUBING SEGMENT AND FLANGE
MAXIMUM OPERATING PRESSURE: 20.0 POUNDS PER SQUARE INCH GAGE
NOMINAL THREAD SIZE: 0.164 INCHES ALL FLANGES SINGLE CONNECTION FACILITY
STYLE DESIGNATOR: B2 BEND TYPE
THREAD CLASS: 2B ALL FLANGES SINGLE CONNECTION FACILITY
THREAD DIRECTION: RIGHT-HAND ALL FLANGES SINGLE CONNECTION FACILITY
THREAD SERIES DESIGNATOR: UNC ALL FLANGES SINGLE CONNECTION FACILITY
TUBING WALL CONSTRUCTION STYLE: J1 SEAMLESS ALL TUBING SEGMENT
WAVEGUIDE INSIDE HEIGHT: 0.493 INCHES MINIMUM AND 0.501 INCHES MAXIMUM
WAVEGUIDE INSIDE WIDTH: 1.118 INCHES MINIMUM AND 1.126 INCHES MAXIMUM
WAVEGUIDE LONGER OFFSET DISTANCE: 5.120 INCHES NOMINAL
WAVEGUIDE OFFSET DISTANCE: 2.250 INCHES NOMINAL
WAVEGUIDE OUTSIDE HEIGHT: 0.621 INCHES MINIMUM AND 0.629 INCHES MAXIMUM
WAVEGUIDE OUTSIDE WIDTH: 1.246 INCHES MINIMUM AND 1.254 INCHES MAXIMUM
Related Searches:
654M2204-15
RADOME
NSN, MFG P/N
5985010972503
NSN
5985-01-097-2503
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
ANTI-ICING PROVISION: NOT INCLUDED
DE-ICING PROVISION: NOT INCLUDED
DESIGN CONTROL REFERENCE: 654M2204-15
III END ITEM IDENTIFICATION: AN/MST-T1
INFLATED RADOME SHAPE: SEMISPHERICAL
MANUFACTURERS CODE: 81755
OVERALL DIAMETER: 2.500 INCHES NOMINAL
PRESSURIZING DEVICE: NOT INCLUDED
SPECIAL FEATURES: 8 HOLES 0.182IN DIA ON 2.187IN BC FOR MTG
THE MANUFACTURERS DATA:
Related Searches:
654M2204-11
RADOME
NSN, MFG P/N
5985010972504
NSN
5985-01-097-2504
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
ANTI-ICING PROVISION: NOT INCLUDED
DE-ICING PROVISION: NOT INCLUDED
DESIGN CONTROL REFERENCE: 654M2204-11
III END ITEM IDENTIFICATION: AN/MST-T1
INFLATED RADOME SHAPE: SEMISPHERICAL
MANUFACTURERS CODE: 81755
OVERALL DIAMETER: 3.440 INCHES NOMINAL
PRESSURIZING DEVICE: NOT INCLUDED
THE MANUFACTURERS DATA:
Related Searches:
RA-2010-11
RADOME
NSN, MFG P/N
5985010972504
NSN
5985-01-097-2504
MFG
ROZENDAL ASSOCIATES INC
Description
ANTI-ICING PROVISION: NOT INCLUDED
DE-ICING PROVISION: NOT INCLUDED
DESIGN CONTROL REFERENCE: 654M2204-11
III END ITEM IDENTIFICATION: AN/MST-T1
INFLATED RADOME SHAPE: SEMISPHERICAL
MANUFACTURERS CODE: 81755
OVERALL DIAMETER: 3.440 INCHES NOMINAL
PRESSURIZING DEVICE: NOT INCLUDED
THE MANUFACTURERS DATA:
Related Searches:
654M2104-7
RADOME
NSN, MFG P/N
5985010972505
NSN
5985-01-097-2505
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DESIGN CONTROL REFERENCE: 654M2104-7
III END ITEM IDENTIFICATION: AN/MST-T1
INFLATED RADOME SHAPE: SEMIELLIPTICAL
MANUFACTURERS CODE: 81755
OVERALL HEIGHT: 4.900 INCHES NOMINAL
OVERALL LENGTH: 21.500 INCHES NOMINAL
OVERALL WIDTH: 13.750 INCHES NOMINAL
SPECIAL FEATURES: 18 HOLES 0.205IN DIA ON 0.70IN WD FLANGE
THE MANUFACTURERS DATA: