My Quote Request
6515-01-500-5752
20 Products
GLIDECATH
CATHETER,STRAIGHT G
NSN, MFG P/N
6515015005752
NSN
6515-01-500-5752
MFG
BOSTON SCIENTIFIC CORP MEDI-TECH DIV
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: CATHETER STRAIGHT GLIDE 5FR 100CM LG .038"OD HYDROPHILIC COAT 5S
SPECIAL FEATURES: STRAIGHT TAPER TIP, GLIDE CATHETER; 5 FRENCH; 100CM LENGTH; .038 IN. DIAMETER; HYDROPHILIC COATED; 5 PER BOX
Related Searches:
02-1398
SET,DISTAL,FEMORAL
NSN, MFG P/N
6515015005834
NSN
6515-01-500-5834
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DISTAL FEMORAL NAIL INSERT & LOCKING TITANIUM
MATERIAL: TITANIUM
SPECIAL FEATURES: SET INCLUDES THE FOLLOWING COMPONENT: HEXGONAL SCREWDRIVER, 4.0MM THREE-FLUTED DRILL BIT, QUICK COUPLING, 195 MM, 2 EA, SPANNER WRENCH, LARGE REVERSE AWL, 13.0MM CANNULATED DRILL BIT, 300 MM, CONNECTING SCREW; AIMING ARM FOR 6.0 MM TITANIUM LOCKING
~1: SCREWS, 8.0MM/5.0 MM DRILL SLEEVE, 5.0 MM TROCAR, (5) 3.2 MM CALIBRATED GUIDE WIRE, 300 MM; (2 EA) 6.MM LOCKING SCREWS, 45, 50, 55, 60, 70, 75, 80, 90, 95, AND 100 MM; (2) END CAP; (2 EA) 4.9 MM LOCKING BOLTS, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46,
~2: 48, 52, 54, 56, 58, AND 60 MM; (2) 5.0 MM THREE-FLUTED DRILL BIL, QUICK COUPLING 330 MM, 100 MM CALIBRATION; RADIOGRAPHIC RULER, INSETION HANDLE, LOCKING BOLT MEASURING DEVICE, 13.0 MM PROTECTION SLEEVE, 13.0 MM/3.2 MM TROCAR, HAMMER GUIDE, SLIDE HAMMER,
~3: AND 11.0 MM/8.0 MM PROTECTION SLEEVE; (1) GRAPHIC CASE
Related Searches:
105.521
SET,DISTAL,FEMORAL
NSN, MFG P/N
6515015005834
NSN
6515-01-500-5834
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DISTAL FEMORAL NAIL INSERT & LOCKING TITANIUM
MATERIAL: TITANIUM
SPECIAL FEATURES: SET INCLUDES THE FOLLOWING COMPONENT: HEXGONAL SCREWDRIVER, 4.0MM THREE-FLUTED DRILL BIT, QUICK COUPLING, 195 MM, 2 EA, SPANNER WRENCH, LARGE REVERSE AWL, 13.0MM CANNULATED DRILL BIT, 300 MM, CONNECTING SCREW; AIMING ARM FOR 6.0 MM TITANIUM LOCKING
~1: SCREWS, 8.0MM/5.0 MM DRILL SLEEVE, 5.0 MM TROCAR, (5) 3.2 MM CALIBRATED GUIDE WIRE, 300 MM; (2 EA) 6.MM LOCKING SCREWS, 45, 50, 55, 60, 70, 75, 80, 90, 95, AND 100 MM; (2) END CAP; (2 EA) 4.9 MM LOCKING BOLTS, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46,
~2: 48, 52, 54, 56, 58, AND 60 MM; (2) 5.0 MM THREE-FLUTED DRILL BIL, QUICK COUPLING 330 MM, 100 MM CALIBRATION; RADIOGRAPHIC RULER, INSETION HANDLE, LOCKING BOLT MEASURING DEVICE, 13.0 MM PROTECTION SLEEVE, 13.0 MM/3.2 MM TROCAR, HAMMER GUIDE, SLIDE HAMMER,
~3: AND 11.0 MM/8.0 MM PROTECTION SLEEVE; (1) GRAPHIC CASE
Related Searches:
6515NCM020859
SET,DISTAL,FEMORAL
NSN, MFG P/N
6515015005834
NSN
6515-01-500-5834
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DISTAL FEMORAL NAIL INSERT & LOCKING TITANIUM
MATERIAL: TITANIUM
SPECIAL FEATURES: SET INCLUDES THE FOLLOWING COMPONENT: HEXGONAL SCREWDRIVER, 4.0MM THREE-FLUTED DRILL BIT, QUICK COUPLING, 195 MM, 2 EA, SPANNER WRENCH, LARGE REVERSE AWL, 13.0MM CANNULATED DRILL BIT, 300 MM, CONNECTING SCREW; AIMING ARM FOR 6.0 MM TITANIUM LOCKING
~1: SCREWS, 8.0MM/5.0 MM DRILL SLEEVE, 5.0 MM TROCAR, (5) 3.2 MM CALIBRATED GUIDE WIRE, 300 MM; (2 EA) 6.MM LOCKING SCREWS, 45, 50, 55, 60, 70, 75, 80, 90, 95, AND 100 MM; (2) END CAP; (2 EA) 4.9 MM LOCKING BOLTS, 26, 28, 30, 32, 34, 36, 38, 40, 42, 44, 46,
~2: 48, 52, 54, 56, 58, AND 60 MM; (2) 5.0 MM THREE-FLUTED DRILL BIL, QUICK COUPLING 330 MM, 100 MM CALIBRATION; RADIOGRAPHIC RULER, INSETION HANDLE, LOCKING BOLT MEASURING DEVICE, 13.0 MM PROTECTION SLEEVE, 13.0 MM/3.2 MM TROCAR, HAMMER GUIDE, SLIDE HAMMER,
~3: AND 11.0 MM/8.0 MM PROTECTION SLEEVE; (1) GRAPHIC CASE
Related Searches:
02-1399
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
02-1399
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
COMPONENT AND QUANTITY: (2) DRILL, BIT QUICK COUPLING, 1.1MM, 60MM, 1.5MM, 85MM, 2.0MM, 100MM, 2.7MM, 100MM; COUNTERSINK, FOR 2.7MM, 1.5MM, AND 2.0MM CORTEX SCREWS; HANDLE W/MINI QUICK COUPLIN, STAINLESS STEEL; (2) TAP CORTEX SCREWS FOR 1.5MM, 50 MM, 2.0MM, 54MM, AND 2.7MM,
DESIGN DESIGNATION: SYNTHES
FEATURES PROVIDED: REUSABLE
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET MINI-FRAGMENT
SPECIAL FEATURES: (4) 1.5 MM CORTEX SCREWS, SELF-TAPPING, 6 THROUGH 12, 14 AND 16MM; (6) 2.0MM 6, 8, 10, 12, 14, 16, 18 AND 20; (6) 2.7, 6, 8, 10, 12, 14, 16, 18, 20, 22 AND 24MM; (6) WASHER, 7.0 MM FOR SMALL SCREWS; (2) QUARTER-TUBULAR PLATES WITH COLLAR 3 THROUGH 8
~1: 100MM; HANDLE FOR QUICK COUPLING; (1) DOUBLE DRILL SLEEVE 1.5MM/1.1MM, 2.0MM/1.5MM, AND 2.7MM/2.0MM; 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE; SMALL HEAXAGONAL SCREWDRIVER SHAFT; CRUCIFORM SCREWDRIVER SHAFT WITH HOLDING SLEEVE; DEPTH GAUGE FOR 2.7 MM
~1: HOLES; (2) 2.7MM LEFT AND RIGHT L-PLATES, 3 HOLES OBLIQUE; (4) 2.7MM T-PLATE, 3 HOLES; (2) 2.0MM STRAIGHT PLATES 3 THROUGH 5 HOLES; (2) 2.0 MM LEFT AND RIGHT OBLIQUE L-PLATES; (4) 2.0MM T-PLATES; KIRSCHNER WIRES, TROCAR POINT; 1 PKG 0.6 AND 0.8 MM DIA; 70
~2: AND 3.5MM CORTEX AND 4.0MM CANCELLOUS BONE SCREWS; SHARP HOOK; SREW FORCEPS; BENDING IRON FOR 1.5 MM AND 2.0MM PLATES; BENDING PLIERS, FOR 1.5MM AND 2.0MM PLATES; WIRE CUTTER 175MM LENGTH; HOLDING FORCEPS, FOR SMALL PLATES; 135 MM LENGTH; HOLDING FORCEPS,
~2: MM; 1 PKG 1.0 , 1.25 AND 1.6 MM DIA; 150 MM AND (1) GRAPHIC CASE
~3: WITH FOOT, FOR MINI PLATES, 135MM LENGTH, (2) HOHMANN RETRACTOR 6MM, 8MM, AND 15 MM WIDTH; PERIOSTEAL ELEVATOR, 3MM WIDTH, CURVED BLADE, STRAIGHT EDGE; REDUCTION FORCEPS WITH POINTS, 130 MM LENGTH, RATCHET
Related Searches:
105.488
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
105.488
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
COMPONENT AND QUANTITY: (2) DRILL, BIT QUICK COUPLING, 1.1MM, 60MM, 1.5MM, 85MM, 2.0MM, 100MM, 2.7MM, 100MM; COUNTERSINK, FOR 2.7MM, 1.5MM, AND 2.0MM CORTEX SCREWS; HANDLE W/MINI QUICK COUPLIN, STAINLESS STEEL; (2) TAP CORTEX SCREWS FOR 1.5MM, 50 MM, 2.0MM, 54MM, AND 2.7MM,
DESIGN DESIGNATION: SYNTHES
FEATURES PROVIDED: REUSABLE
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET MINI-FRAGMENT
SPECIAL FEATURES: (4) 1.5 MM CORTEX SCREWS, SELF-TAPPING, 6 THROUGH 12, 14 AND 16MM; (6) 2.0MM 6, 8, 10, 12, 14, 16, 18 AND 20; (6) 2.7, 6, 8, 10, 12, 14, 16, 18, 20, 22 AND 24MM; (6) WASHER, 7.0 MM FOR SMALL SCREWS; (2) QUARTER-TUBULAR PLATES WITH COLLAR 3 THROUGH 8
~1: 100MM; HANDLE FOR QUICK COUPLING; (1) DOUBLE DRILL SLEEVE 1.5MM/1.1MM, 2.0MM/1.5MM, AND 2.7MM/2.0MM; 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE; SMALL HEAXAGONAL SCREWDRIVER SHAFT; CRUCIFORM SCREWDRIVER SHAFT WITH HOLDING SLEEVE; DEPTH GAUGE FOR 2.7 MM
~1: HOLES; (2) 2.7MM LEFT AND RIGHT L-PLATES, 3 HOLES OBLIQUE; (4) 2.7MM T-PLATE, 3 HOLES; (2) 2.0MM STRAIGHT PLATES 3 THROUGH 5 HOLES; (2) 2.0 MM LEFT AND RIGHT OBLIQUE L-PLATES; (4) 2.0MM T-PLATES; KIRSCHNER WIRES, TROCAR POINT; 1 PKG 0.6 AND 0.8 MM DIA; 70
~2: AND 3.5MM CORTEX AND 4.0MM CANCELLOUS BONE SCREWS; SHARP HOOK; SREW FORCEPS; BENDING IRON FOR 1.5 MM AND 2.0MM PLATES; BENDING PLIERS, FOR 1.5MM AND 2.0MM PLATES; WIRE CUTTER 175MM LENGTH; HOLDING FORCEPS, FOR SMALL PLATES; 135 MM LENGTH; HOLDING FORCEPS,
~2: MM; 1 PKG 1.0 , 1.25 AND 1.6 MM DIA; 150 MM AND (1) GRAPHIC CASE
~3: WITH FOOT, FOR MINI PLATES, 135MM LENGTH, (2) HOHMANN RETRACTOR 6MM, 8MM, AND 15 MM WIDTH; PERIOSTEAL ELEVATOR, 3MM WIDTH, CURVED BLADE, STRAIGHT EDGE; REDUCTION FORCEPS WITH POINTS, 130 MM LENGTH, RATCHET
Related Searches:
6515NCM020860
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
6515NCM020860
INSTRUMENT AND IMPLANT SET,MINI-FRAGMENT,ORTHOPEDIC
NSN, MFG P/N
6515015005898
NSN
6515-01-500-5898
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
COMPONENT AND QUANTITY: (2) DRILL, BIT QUICK COUPLING, 1.1MM, 60MM, 1.5MM, 85MM, 2.0MM, 100MM, 2.7MM, 100MM; COUNTERSINK, FOR 2.7MM, 1.5MM, AND 2.0MM CORTEX SCREWS; HANDLE W/MINI QUICK COUPLIN, STAINLESS STEEL; (2) TAP CORTEX SCREWS FOR 1.5MM, 50 MM, 2.0MM, 54MM, AND 2.7MM,
DESIGN DESIGNATION: SYNTHES
FEATURES PROVIDED: REUSABLE
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET MINI-FRAGMENT
SPECIAL FEATURES: (4) 1.5 MM CORTEX SCREWS, SELF-TAPPING, 6 THROUGH 12, 14 AND 16MM; (6) 2.0MM 6, 8, 10, 12, 14, 16, 18 AND 20; (6) 2.7, 6, 8, 10, 12, 14, 16, 18, 20, 22 AND 24MM; (6) WASHER, 7.0 MM FOR SMALL SCREWS; (2) QUARTER-TUBULAR PLATES WITH COLLAR 3 THROUGH 8
~1: 100MM; HANDLE FOR QUICK COUPLING; (1) DOUBLE DRILL SLEEVE 1.5MM/1.1MM, 2.0MM/1.5MM, AND 2.7MM/2.0MM; 2.0MM PARALLEL DRILL GUIDE AND DRILL SLEEVE; SMALL HEAXAGONAL SCREWDRIVER SHAFT; CRUCIFORM SCREWDRIVER SHAFT WITH HOLDING SLEEVE; DEPTH GAUGE FOR 2.7 MM
~1: HOLES; (2) 2.7MM LEFT AND RIGHT L-PLATES, 3 HOLES OBLIQUE; (4) 2.7MM T-PLATE, 3 HOLES; (2) 2.0MM STRAIGHT PLATES 3 THROUGH 5 HOLES; (2) 2.0 MM LEFT AND RIGHT OBLIQUE L-PLATES; (4) 2.0MM T-PLATES; KIRSCHNER WIRES, TROCAR POINT; 1 PKG 0.6 AND 0.8 MM DIA; 70
~2: AND 3.5MM CORTEX AND 4.0MM CANCELLOUS BONE SCREWS; SHARP HOOK; SREW FORCEPS; BENDING IRON FOR 1.5 MM AND 2.0MM PLATES; BENDING PLIERS, FOR 1.5MM AND 2.0MM PLATES; WIRE CUTTER 175MM LENGTH; HOLDING FORCEPS, FOR SMALL PLATES; 135 MM LENGTH; HOLDING FORCEPS,
~2: MM; 1 PKG 1.0 , 1.25 AND 1.6 MM DIA; 150 MM AND (1) GRAPHIC CASE
~3: WITH FOOT, FOR MINI PLATES, 135MM LENGTH, (2) HOHMANN RETRACTOR 6MM, 8MM, AND 15 MM WIDTH; PERIOSTEAL ELEVATOR, 3MM WIDTH, CURVED BLADE, STRAIGHT EDGE; REDUCTION FORCEPS WITH POINTS, 130 MM LENGTH, RATCHET
Related Searches:
02-1400
INSTRUMENT AND IMPL
NSN, MFG P/N
6515015005926
NSN
6515-01-500-5926
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET CANNULATED SCREWS
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; (2) 2.7MM DRILL BIT, QUICK COUPLING, 160MM; COUNTERSINK, HANDLE WITH QUICK COUPLING, CANNULATED TAP, 2.7MM/1.25MM DOUBLE DRILL SLEEVE; SMALL HEXAGONAL SCREWDRIVER SHAFT; HOLDING SLEEVE FOR SCREWDRIVER; HEAXAGONAL SCREWDRIVER;
~1: SCREW MEASURING DEVICE; 1.3MM CLEANING BRUSH; 1.25MM CLEANING STYLET; SCREW FORCEPS; (3 EA) 4.0MM SCREWS, SHORT TRHREAD 10 THROUGH 50MM; (6) WASHER, 7.0MM AND (2) 10 PKG 1.25MM THREADED GUIDE WIRE, 150 MM
Related Searches:
105.135
INSTRUMENT AND IMPL
NSN, MFG P/N
6515015005926
NSN
6515-01-500-5926
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET CANNULATED SCREWS
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; (2) 2.7MM DRILL BIT, QUICK COUPLING, 160MM; COUNTERSINK, HANDLE WITH QUICK COUPLING, CANNULATED TAP, 2.7MM/1.25MM DOUBLE DRILL SLEEVE; SMALL HEXAGONAL SCREWDRIVER SHAFT; HOLDING SLEEVE FOR SCREWDRIVER; HEAXAGONAL SCREWDRIVER;
~1: SCREW MEASURING DEVICE; 1.3MM CLEANING BRUSH; 1.25MM CLEANING STYLET; SCREW FORCEPS; (3 EA) 4.0MM SCREWS, SHORT TRHREAD 10 THROUGH 50MM; (6) WASHER, 7.0MM AND (2) 10 PKG 1.25MM THREADED GUIDE WIRE, 150 MM
Related Searches:
6515NCM020861
INSTRUMENT AND IMPL
NSN, MFG P/N
6515015005926
NSN
6515-01-500-5926
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT & IMPLANT SET CANNULATED SCREWS
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; (2) 2.7MM DRILL BIT, QUICK COUPLING, 160MM; COUNTERSINK, HANDLE WITH QUICK COUPLING, CANNULATED TAP, 2.7MM/1.25MM DOUBLE DRILL SLEEVE; SMALL HEXAGONAL SCREWDRIVER SHAFT; HOLDING SLEEVE FOR SCREWDRIVER; HEAXAGONAL SCREWDRIVER;
~1: SCREW MEASURING DEVICE; 1.3MM CLEANING BRUSH; 1.25MM CLEANING STYLET; SCREW FORCEPS; (3 EA) 4.0MM SCREWS, SHORT TRHREAD 10 THROUGH 50MM; (6) WASHER, 7.0MM AND (2) 10 PKG 1.25MM THREADED GUIDE WIRE, 150 MM
Related Searches:
02-1393
PLATE SET,BONE,COMPRESSION
NSN, MFG P/N
6515015005930
NSN
6515-01-500-5930
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
COMPONENT QUANTITY: 50
III PART NAME ASSIGNED BY CONTROLLING AGENCY: PLATE SET BONE COMPRESSION BASIC LC-DCP
SPECIAL FEATURES: FOR USE IN RECONSTRUCTIVE SURGERY
SUPPLY ITEMS AND QUANTITIES: GRAPHIC CASE,1; SEMI-TUBULAR PLATES 2 EA:4,5 AND 6 HOLES; 1 EA:7HOLES; 4.5MM NARROW PLATES,17(4-12 HOLES); 4.5MM BROAD PLATES,10 (6-14 HOLES); T-PLATES,3(4-8 HOLES); L-BUTTRESS PLATES,2 (4 HOLES), RIGHT AND LEFT ANGLE
Related Searches:
105.260
PLATE SET,BONE,COMPRESSION
NSN, MFG P/N
6515015005930
NSN
6515-01-500-5930
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
COMPONENT QUANTITY: 50
III PART NAME ASSIGNED BY CONTROLLING AGENCY: PLATE SET BONE COMPRESSION BASIC LC-DCP
SPECIAL FEATURES: FOR USE IN RECONSTRUCTIVE SURGERY
SUPPLY ITEMS AND QUANTITIES: GRAPHIC CASE,1; SEMI-TUBULAR PLATES 2 EA:4,5 AND 6 HOLES; 1 EA:7HOLES; 4.5MM NARROW PLATES,17(4-12 HOLES); 4.5MM BROAD PLATES,10 (6-14 HOLES); T-PLATES,3(4-8 HOLES); L-BUTTRESS PLATES,2 (4 HOLES), RIGHT AND LEFT ANGLE
Related Searches:
6515NCM020854
PLATE SET,BONE,COMPRESSION
NSN, MFG P/N
6515015005930
NSN
6515-01-500-5930
6515NCM020854
PLATE SET,BONE,COMPRESSION
NSN, MFG P/N
6515015005930
NSN
6515-01-500-5930
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
COMPONENT QUANTITY: 50
III PART NAME ASSIGNED BY CONTROLLING AGENCY: PLATE SET BONE COMPRESSION BASIC LC-DCP
SPECIAL FEATURES: FOR USE IN RECONSTRUCTIVE SURGERY
SUPPLY ITEMS AND QUANTITIES: GRAPHIC CASE,1; SEMI-TUBULAR PLATES 2 EA:4,5 AND 6 HOLES; 1 EA:7HOLES; 4.5MM NARROW PLATES,17(4-12 HOLES); 4.5MM BROAD PLATES,10 (6-14 HOLES); T-PLATES,3(4-8 HOLES); L-BUTTRESS PLATES,2 (4 HOLES), RIGHT AND LEFT ANGLE
Related Searches:
02-1401
SET,DYNAMIC CONDYLA
NSN, MFG P/N
6515015005931
NSN
6515-01-500-5931
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DYNAMIC CONDYLAR SCREWS
SPECIAL FEATURES: SET INCLUDED: DHS/DCS LAG SCREWS, 12.7 MM DIA. THREAD (2 EA) 50, 55, 60, 65, 70, AND 75 MM; (6) DHS/DCS COMPRESSION SCREWS, 36 MM; 95 DEGREE DCS PLATES (1 EA) 12, 14, AND 16 HOLES; (2 EA) 6, 8, AND 10 HOLES; (1) GRAPHIC CASE
Related Searches:
105.32
SET,DYNAMIC CONDYLA
NSN, MFG P/N
6515015005931
NSN
6515-01-500-5931
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DYNAMIC CONDYLAR SCREWS
SPECIAL FEATURES: SET INCLUDED: DHS/DCS LAG SCREWS, 12.7 MM DIA. THREAD (2 EA) 50, 55, 60, 65, 70, AND 75 MM; (6) DHS/DCS COMPRESSION SCREWS, 36 MM; 95 DEGREE DCS PLATES (1 EA) 12, 14, AND 16 HOLES; (2 EA) 6, 8, AND 10 HOLES; (1) GRAPHIC CASE
Related Searches:
6515NCM020862
SET,DYNAMIC CONDYLA
NSN, MFG P/N
6515015005931
NSN
6515-01-500-5931
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DYNAMIC CONDYLAR SCREWS
SPECIAL FEATURES: SET INCLUDED: DHS/DCS LAG SCREWS, 12.7 MM DIA. THREAD (2 EA) 50, 55, 60, 65, 70, AND 75 MM; (6) DHS/DCS COMPRESSION SCREWS, 36 MM; 95 DEGREE DCS PLATES (1 EA) 12, 14, AND 16 HOLES; (2 EA) 6, 8, AND 10 HOLES; (1) GRAPHIC CASE
Related Searches:
02-1402
INSTRUMENT SET,UNIV
NSN, MFG P/N
6515015005947
NSN
6515-01-500-5947
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT SET UNIVERSAL NAIL REAMING
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; SMALL AWL; TISSUE PROTECTOR; (3) 4.0MM CENTERING PIN, 400MM; 11.0MM CANNULATED CUTTER; PROTECTION SLEEVE, FOR CUTTER; FLEXIBLE SHAFT, W/9.0MM FRONT CUTTING REAMER, 440MM; 8.0MM AND 10.0MM FLEXIBLE SHAFT, 440MM; MEDULLARY REAMER
~1: HEADS (1 EA) 9.5 THROUGH 19.0 MM; (3) 3.0MM REAMING ROD, 950MM; HOLDING FORCEPS; AIR JET; (2) 2.0MM AIR TUBE; (1 EA) 6.0MM, 7.0MM, AND 8.0MM HAND REAMER, 450MM; (2) MEDULLARY TUBE; LOCKING PLIERS; AND (1) UNIVERSAL CHUCK WITH T-HANDLE
Related Searches:
115.50
INSTRUMENT SET,UNIV
NSN, MFG P/N
6515015005947
NSN
6515-01-500-5947
MFG
SYNTHES USA SALES LLC DBA SYNTHES
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT SET UNIVERSAL NAIL REAMING
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; SMALL AWL; TISSUE PROTECTOR; (3) 4.0MM CENTERING PIN, 400MM; 11.0MM CANNULATED CUTTER; PROTECTION SLEEVE, FOR CUTTER; FLEXIBLE SHAFT, W/9.0MM FRONT CUTTING REAMER, 440MM; 8.0MM AND 10.0MM FLEXIBLE SHAFT, 440MM; MEDULLARY REAMER
~1: HEADS (1 EA) 9.5 THROUGH 19.0 MM; (3) 3.0MM REAMING ROD, 950MM; HOLDING FORCEPS; AIR JET; (2) 2.0MM AIR TUBE; (1 EA) 6.0MM, 7.0MM, AND 8.0MM HAND REAMER, 450MM; (2) MEDULLARY TUBE; LOCKING PLIERS; AND (1) UNIVERSAL CHUCK WITH T-HANDLE
Related Searches:
6515NCM020863
INSTRUMENT SET,UNIV
NSN, MFG P/N
6515015005947
NSN
6515-01-500-5947
MFG
DEFENSE MEDICAL STANDARDIZATION BOARD
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INSTRUMENT SET UNIVERSAL NAIL REAMING
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; SMALL AWL; TISSUE PROTECTOR; (3) 4.0MM CENTERING PIN, 400MM; 11.0MM CANNULATED CUTTER; PROTECTION SLEEVE, FOR CUTTER; FLEXIBLE SHAFT, W/9.0MM FRONT CUTTING REAMER, 440MM; 8.0MM AND 10.0MM FLEXIBLE SHAFT, 440MM; MEDULLARY REAMER
~1: HEADS (1 EA) 9.5 THROUGH 19.0 MM; (3) 3.0MM REAMING ROD, 950MM; HOLDING FORCEPS; AIR JET; (2) 2.0MM AIR TUBE; (1 EA) 6.0MM, 7.0MM, AND 8.0MM HAND REAMER, 450MM; (2) MEDULLARY TUBE; LOCKING PLIERS; AND (1) UNIVERSAL CHUCK WITH T-HANDLE
Related Searches:
02-1403
SET,DISTRACTOR
NSN, MFG P/N
6515015005951
NSN
6515-01-500-5951
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SET DISTRACTOR LARGE
SPECIAL FEATURES: SET INCLUDES: GRAPHIC CASE; (2) 3.5MM DRILL BIT, QUICK COUPLING; 4.5MM PIN WRENCH, 120MM; UNIVERSAL CHUCK W/T-HANDLE; 3.5MM TROCAR, 110MM; (1 EA) DRILL SLEEVE, 5.0MM/3.5MM, 110MM AND 6.0MM/5.0MM, 98MM; (1 EA) THREADED SPINDLE, 14.0MM, 480MM AND 14.0MM,
~1: 330MM; (3) SPINDLE NUT; SLIDING CARRIAGE; END PIECE WITH DOUBLE JOINT; (2 EA) HOLDING SLEVE, 55MM LENGTH AND 105MM LENGTH; (4) 5.0 MM SCHANZ SCREWS, BLUNTED TROCAR POINT, 170 AND 200MM LENGTH; AND (4) 6.0 MM SCHANZ SCREWS, DIAMOND POINT 160 AND 190MM
~2: LENGTH