My Quote Request
5305-01-043-4301
20 Products
106750-5-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010434301
NSN
5305-01-043-4301
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 26512-GB510L MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP 63.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
RE-B102276
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
MFG
NAVAL SEA SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: RE-B102276
MANUFACTURERS CODE: 53711
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: QUALITY ASSURANCE TESTED FOR SUBMARINE ANTENNA APPLICATION
THE MANUFACTURERS DATA:
Related Searches:
RE-B102276SQ
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
MFG
NAVAL INVENTORY CONTROL POINT MECHANICSBURG
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: RE-B102276
MANUFACTURERS CODE: 53711
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: QUALITY ASSURANCE TESTED FOR SUBMARINE ANTENNA APPLICATION
THE MANUFACTURERS DATA:
Related Searches:
RE-F49487 ITEM 22
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
RE-F49487 ITEM 22
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: RE-B102276
MANUFACTURERS CODE: 53711
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: QUALITY ASSURANCE TESTED FOR SUBMARINE ANTENNA APPLICATION
THE MANUFACTURERS DATA:
Related Searches:
RE-F49487 ITEM 22SQ
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
RE-F49487 ITEM 22SQ
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010433428
NSN
5305-01-043-3428
MFG
NAVAL INVENTORY CONTROL POINT MECHANICSBURG
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: RE-B102276
MANUFACTURERS CODE: 53711
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: QUALITY ASSURANCE TESTED FOR SUBMARINE ANTENNA APPLICATION
THE MANUFACTURERS DATA:
Related Searches:
AS169-4-50
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433429
NSN
5305-01-043-3429
MFG
AVIBANK MFG. INC.
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B450
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 3.448 INCHES MINIMUM AND 3.468 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
CA2658-4-50
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433429
NSN
5305-01-043-3429
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B450
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 3.448 INCHES MINIMUM AND 3.468 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369-450
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433429
NSN
5305-01-043-3429
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B450
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 3.448 INCHES MINIMUM AND 3.468 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369B450
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433429
NSN
5305-01-043-3429
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B450
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 3.448 INCHES MINIMUM AND 3.468 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 3.543 INCHES MINIMUM AND 3.563 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 3.125 INCHES MINIMUM AND 3.141 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 630 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
AS169-4-72
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433430
NSN
5305-01-043-3430
MFG
AVIBANK MFG. INC.
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B472
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.823 INCHES MINIMUM AND 4.843 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 4.918 INCHES MINIMUM AND 4.938 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 4.500 INCHES MINIMUM AND 4.516 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
CA2658-4-72
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433430
NSN
5305-01-043-3430
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B472
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.823 INCHES MINIMUM AND 4.843 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 4.918 INCHES MINIMUM AND 4.938 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 4.500 INCHES MINIMUM AND 4.516 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
MS3369B472
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010433430
NSN
5305-01-043-3430
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3369B472
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 4.823 INCHES MINIMUM AND 4.843 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 4.918 INCHES MINIMUM AND 4.938 INCHES MAXIMUM
GRIP DIAMETER: 0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 4.500 INCHES MINIMUM AND 4.516 INCHES MAXIMUM
HEAD HEIGHT: 0.126 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C4 CROWNED HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
SPECIAL FEATURES: RETAINING ELEMENT IN SHANK
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.277 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
2451689-1
SCREW,SPECIAL
NSN, MFG P/N
5305010433850
NSN
5305-01-043-3850
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 2451689-1
MANUFACTURERS CODE: 10001
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MIL-Q-21549B-SP24-1
Related Searches:
0-80X3-8SLTDPNHSST
SCREW,MACHINE
NSN, MFG P/N
5305010434294
NSN
5305-01-043-4294
MFG
STAR STAINLESS SCREW CO
Description
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
HEAD HEIGHT: 0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0-80X3-8SLTDPWHSST
SCREW,MACHINE
NSN, MFG P/N
5305010434294
NSN
5305-01-043-4294
MFG
STAR STAINLESS SCREW CO
Description
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.104 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
HEAD HEIGHT: 0.031 INCHES MINIMUM AND 0.039 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.060 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.319 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 80
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS560XK4P19
SCREW,MACHINE
NSN, MFG P/N
5305010434295
NSN
5305-01-043-4295
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 1.699 INCHES MINIMUM AND 1.744 INCHES MAXIMUM
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD 1ST MATERIAL RESPONSE OR AMS 5733 ASSN STD 2ND MATERIAL RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS560 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.496 INCHES MINIMUM AND 0.571 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
LP22D82S4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010434296
NSN
5305-01-043-4296
MFG
LONG-LOK FASTENERS CORPORATION
Description
FASTENER LENGTH: 0.229 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.306 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD HEIGHT: 0.085 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.167 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
A147-5-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010434301
NSN
5305-01-043-4301
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 26512-GB510L MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP 63.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
A147-5-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010434301
NSN
5305-01-043-4301
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 26512-GB510L MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP 63.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BM19025-5-10
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305010434301
NSN
5305-01-043-4301
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
HEAD DIAMETER: 0.469 INCHES MINIMUM AND 0.474 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4130 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIFICATION/STANDARD DATA: 26512-GB510L MANUFACTURERS STANDARD
SURFACE FINISH: 63.0 MICROINCHES GRIP 63.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.349 INCHES MINIMUM AND 0.416 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF