My Quote Request
5305-01-503-8157
20 Products
11441099-2
SCREW,SHOULDER
NSN, MFG P/N
5305015038157
NSN
5305-01-503-8157
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
FASTENER LENGTH: 0.451 INCHES NOMINAL
HEAD DIAMETER: 0.312 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C29 BINDING
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SHOULDER SHAPE: ROUND OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS7703-12
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015038168
NSN
5305-01-503-8168
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.058 INCHES MINIMUM AND 1.088 INCHES MAXIMUM
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD DIAMETER: 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
HEAD STYLE: C32 PAN
III END ITEM IDENTIFICATION: KC135 GATM A
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.323 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS8602-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015038298
NSN
5305-01-503-8298
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.433 INCHES MINIMUM AND 0.463 INCHES MAXIMUM
GRIP DIAMETER: 0.1625 INCHES MINIMUM AND 0.1635 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.226 INCHES MINIMUM AND 0.257 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: KC135 GATM A
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.323 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
124-6938645 PART 273
SETSCREW
NSN, MFG P/N
5305015038323
NSN
5305-01-503-8323
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
III END ITEM IDENTIFICATION: DOOR HORIZ SL
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP OVERALL
MATERIAL: STEEL COMP 4032 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT CHAMFER ANGLE: 110.0 DEGREES NOMINAL
POINT DIAMETER: 0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
POINT LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
POINT STYLE: F21 HALF DOG
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
124-6938645 PART 273
SETSCREW
NSN, MFG P/N
5305015038323
NSN
5305-01-503-8323
MFG
NORTHROP GRUMMAN SHIPBUILDING INC. DIV NEWPORT NEWS
Description
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD STYLE: C101 HEADLESS (SETSCREW)
III END ITEM IDENTIFICATION: DOOR HORIZ SL
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR PELLET OR STRIP OVERALL
MATERIAL: STEEL COMP 4032 OR STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT CHAMFER ANGLE: 110.0 DEGREES NOMINAL
POINT DIAMETER: 0.334 INCHES MINIMUM AND 0.344 INCHES MAXIMUM
POINT LENGTH: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
POINT STYLE: F21 HALF DOG
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL
Related Searches:
23-01724-431
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305015038329
NSN
5305-01-503-8329
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
FASTENER LENGTH: 0.712 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD DIAMETER: 0.160 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIAL FEATURES: TO BE INSTALLEDIN SHEET METAL PANELS BY SWAGING OR FLARING THE RETAINER INTO A PREPARED COUNTERSUNK HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.094 INCHES NOMINAL
Related Searches:
955C170-88
SCREW,MACHINE
NSN, MFG P/N
5305015038340
NSN
5305-01-503-8340
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
SCREW,MACHINE
Related Searches:
955C170-98
SCREW,MACHINE
NSN, MFG P/N
5305015038341
NSN
5305-01-503-8341
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
SCREW,MACHINE
Related Searches:
AES43M06A025DX9A31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015038430
NSN
5305-01-503-8430
AES43M06A025DX9A31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015038430
NSN
5305-01-503-8430
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
EXTERNAL THREAD TOLERANCE CLASS: 4G6G
FASTENER LENGTH: 25.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 9.7 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM
HEAD HEIGHT: 5.6 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET HEAD CAP SCREW, METRIC
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 24.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 5.0 MILLIMETERS NOMINAL
Related Searches:
B18.3.1M
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015038430
NSN
5305-01-503-8430
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
EXTERNAL THREAD TOLERANCE CLASS: 4G6G
FASTENER LENGTH: 25.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 9.7 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM
HEAD HEIGHT: 5.6 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET HEAD CAP SCREW, METRIC
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 24.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 5.0 MILLIMETERS NOMINAL
Related Searches:
B1831DH060025N
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015038430
NSN
5305-01-503-8430
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
EXTERNAL THREAD TOLERANCE CLASS: 4G6G
FASTENER LENGTH: 25.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 9.7 MILLIMETERS MINIMUM AND 10.0 MILLIMETERS MAXIMUM
HEAD HEIGHT: 5.6 MILLIMETERS MINIMUM AND 6.0 MILLIMETERS MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET HEAD CAP SCREW, METRIC
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 6.0 MILLIMETERS
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 24.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
WIDTH ACROSS FLATS: 5.0 MILLIMETERS NOMINAL
Related Searches:
94567A210
THUMBSCREW
NSN, MFG P/N
5305015038593
NSN
5305-01-503-8593
Description
FASTENER LENGTH: 0.688 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C67 KNURLED NO. 2
III END ITEM IDENTIFICATION: C-17A SPT EQMT
MATERIAL: ALUMINUM OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SHOULDER DIAMETER: 0.375 INCHES NOMINAL OVERALL
SHOULDER LENGTH: 0.125 INCHES NOMINAL OVERALL
SPECIAL FEATURES: THUMBSCREW
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
Related Searches:
5CMV-12-C-4586
SETSCREW
NSN, MFG P/N
5305015038595
NSN
5305-01-503-8595
MFG
CUNNINGHAM MANUFACTURING CO.
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
III END ITEM IDENTIFICATION: C-17A SPT EQMT
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIAL FEATURES: SETSCREW, LOCK RING
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
124-6938645 PART 312
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015038648
NSN
5305-01-503-8648
124-6938645 PART 312
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015038648
NSN
5305-01-503-8648
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 4.250 INCHES NOMINAL
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
III END ITEM IDENTIFICATION: DOOR HORIZ SL
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ995; GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE TREATMENT: ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
Related Searches:
124-6938645 PART 312
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015038648
NSN
5305-01-503-8648
124-6938645 PART 312
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015038648
NSN
5305-01-503-8648
MFG
NORTHROP GRUMMAN SHIPBUILDING INC. DIV NEWPORT NEWS
Description
FASTENER LENGTH: 4.250 INCHES NOMINAL
HEAD HEIGHT: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
III END ITEM IDENTIFICATION: DOOR HORIZ SL
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAEJ995; GRADE 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.625 INCHES
SURFACE TREATMENT: ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 4.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
Related Searches:
B1867BE040100
SCREW,MACHINE
NSN, MFG P/N
5305015038686
NSN
5305-01-503-8686
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 10.0 MILLIMETERS NOMINAL
HEAD DIAMETER: 7.6 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM
HEAD HEIGHT: 2.2 MILLIMETERS MINIMUM AND 2.4 MILLIMETERS MAXIMUM
HEAD STYLE: A23 PAN
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SLOTTED PAN HEAD METRIC MACHINE SCREW
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
SCREW MATERIAL: STEEL PROPERTY CLASS 9.8
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633, TYPE II ASSN STD SINGLE TREATMENT RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 7.3 MILLIMETERS MINIMUM
THREAD PITCH IN MILLIMETERS: 0.7
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 6.8 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM
Related Searches:
SM-F-715217-12
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015038689
NSN
5305-01-503-8689
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
FASTENER LENGTH: 3.500 INCHES NOMINAL
HEAD DIAMETER: 1.479 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD HEIGHT: 0.988 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
III END ITEM IDENTIFICATION: 5985-01-384-6753
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GRADE 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 1.000 INCHES
SURFACE TREATMENT: ZINC AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325, TYPE 2, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.120 INCHES NOMINAL
THREAD QUANTITY PER INCH: 8
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.750 INCHES NOMINAL
Related Searches:
AES10M10C050CH1A81
SCREW,MACHINE
NSN, MFG P/N
5305015038728
NSN
5305-01-503-8728
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
EXTENDED WASHER DIAMETER: 18.7 MILLIMETERS MINIMUM AND 20.8 MILLIMETERS MAXIMUM
EXTENDED WASHER THICKNESS: 1.5 MILLIMETERS MINIMUM
EXTERNAL THREAD TOLERANCE CLASS: 4G
FASTENER LENGTH: 50.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 9.7 MILLIMETERS MAXIMUM
HEAD STYLE: A7 HEXAGON EXTENDED WASHER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: METRIC HEX FLANGE SCREW
INTERNAL DRIVE STYLE: B24 W/O INTERNAL DRIVE
NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS
SCREW MATERIAL: STEEL PROPERTY CLASS 12.9
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633, TYPE II ASSN STD SINGLE TREATMENT RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.5
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 12.6 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM
Related Searches:
B18.2.3.4M
SCREW,MACHINE
NSN, MFG P/N
5305015038728
NSN
5305-01-503-8728
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
EXTENDED WASHER DIAMETER: 18.7 MILLIMETERS MINIMUM AND 20.8 MILLIMETERS MAXIMUM
EXTENDED WASHER THICKNESS: 1.5 MILLIMETERS MINIMUM
EXTERNAL THREAD TOLERANCE CLASS: 4G
FASTENER LENGTH: 50.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 9.7 MILLIMETERS MAXIMUM
HEAD STYLE: A7 HEXAGON EXTENDED WASHER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: METRIC HEX FLANGE SCREW
INTERNAL DRIVE STYLE: B24 W/O INTERNAL DRIVE
NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS
SCREW MATERIAL: STEEL PROPERTY CLASS 12.9
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633, TYPE II ASSN STD SINGLE TREATMENT RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.5
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 12.6 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM
Related Searches:
B18234B10050N
SCREW,MACHINE
NSN, MFG P/N
5305015038728
NSN
5305-01-503-8728
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
EXTENDED WASHER DIAMETER: 18.7 MILLIMETERS MINIMUM AND 20.8 MILLIMETERS MAXIMUM
EXTENDED WASHER THICKNESS: 1.5 MILLIMETERS MINIMUM
EXTERNAL THREAD TOLERANCE CLASS: 4G
FASTENER LENGTH: 50.0 MILLIMETERS NOMINAL
HEAD HEIGHT: 9.7 MILLIMETERS MAXIMUM
HEAD STYLE: A7 HEXAGON EXTENDED WASHER
III END ITEM IDENTIFICATION: INTERIM ARMORED VEHICLE (IAV), CONTRACTOR LOGISTICS SUPPORT (CLS)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: METRIC HEX FLANGE SCREW
INTERNAL DRIVE STYLE: B24 W/O INTERNAL DRIVE
NOMINAL THREAD DIAMETER: 10.0 MILLIMETERS
SCREW MATERIAL: STEEL PROPERTY CLASS 12.9
SCREW SURFACE TREATMENT: ZINC
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633, TYPE II ASSN STD SINGLE TREATMENT RESPONSE
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 26.0 MILLIMETERS NOMINAL
THREAD PITCH IN MILLIMETERS: 1.5
THREAD SERIES DESIGNATOR: M
WIDTH BETWEEN FLATS: 12.6 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM