My Quote Request
5310-00-596-0124
20 Products
1320032
WASHER,FLAT
NSN, MFG P/N
5310005960124
NSN
5310-00-596-0124
MFG
ALLIED SIGNAL INC AEROSPACE EQUIPMENT SYSTEMS EATONTOWN SITE
Description
CENTER HOLE SHAPE STYLE: 1 ROUND
CROSS-SECTIONAL SHAPE STYLE: 1 RECTANGULAR
DESIGN CONTROL REFERENCE: 1320032
HOLE DIAMETER: 0.328 INCHES MINIMUM AND 0.331 INCHES MAXIMUM
MANUFACTURERS CODE: 83298
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633,CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL DIAMETER: 0.708 INCHES MINIMUM AND 0.728 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE: 1 ROUND
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THICKNESS: 0.088 INCHES MINIMUM AND 0.098 INCHES MAXIMUM
Related Searches:
4497
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960031
NSN
5310-00-596-0031
MFG
CLEVELAND FORMGRADING CO
Description
DESIGN CONTROL REFERENCE: 4497
HOLE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MANUFACTURERS CODE: 79410
MATERIAL: STEEL OVERALL
MATERIAL THICKNESS: 0.0575 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.957 INCHES NOMINAL
OVERALL HEIGHT: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
635863
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960031
NSN
5310-00-596-0031
MFG
AM GENERAL LLC
Description
DESIGN CONTROL REFERENCE: 4497
HOLE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MANUFACTURERS CODE: 79410
MATERIAL: STEEL OVERALL
MATERIAL THICKNESS: 0.0575 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.957 INCHES NOMINAL
OVERALL HEIGHT: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
7372448
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960031
NSN
5310-00-596-0031
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
DESIGN CONTROL REFERENCE: 4497
HOLE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MANUFACTURERS CODE: 79410
MATERIAL: STEEL OVERALL
MATERIAL THICKNESS: 0.0575 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.957 INCHES NOMINAL
OVERALL HEIGHT: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
BB7228
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960031
NSN
5310-00-596-0031
MFG
FORD MOTOR CO
Description
DESIGN CONTROL REFERENCE: 4497
HOLE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MANUFACTURERS CODE: 79410
MATERIAL: STEEL OVERALL
MATERIAL THICKNESS: 0.0575 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.957 INCHES NOMINAL
OVERALL HEIGHT: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
BB7228
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960031
NSN
5310-00-596-0031
MFG
FORD MOTOR CO FORD PARTS AND SERVICE DIV GOVERNMENT PART SALES
Description
DESIGN CONTROL REFERENCE: 4497
HOLE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
MANUFACTURERS CODE: 79410
MATERIAL: STEEL OVERALL
MATERIAL THICKNESS: 0.0575 INCHES MINIMUM AND 0.0675 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.957 INCHES NOMINAL
OVERALL HEIGHT: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
99707
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960051
NSN
5310-00-596-0051
MFG
BELL AND HOWELL PHILLIPSBURG CO CORPORATE OFFICES
Description
DESIGN CONTROL REFERENCE: 99707
FEATURES PROVIDED: CASEHARDENED
HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
MANUFACTURERS CODE: 06650
MATERIAL: COPPER ALLOY OVERALL
MATERIAL THICKNESS: 0.007 INCHES MINIMUM AND 0.009 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM
OVERALL HEIGHT: 0.140 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
THE MANUFACTURERS DATA:
Related Searches:
8B635016
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960056
NSN
5310-00-596-0056
MFG
CHASE AIRCRAFT CO INC
Description
DESIGN CONTROL REFERENCE: 8B635016
HOLE DIAMETER: 0.191 INCHES NOMINAL
MANUFACTURERS CODE: 81025
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.018 INCHES NOMINAL
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL
OVERALL HEIGHT: 0.022 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
8B635016
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960056
NSN
5310-00-596-0056
MFG
HILLER AIRCRAFT CORPORATION
Description
DESIGN CONTROL REFERENCE: 8B635016
HOLE DIAMETER: 0.191 INCHES NOMINAL
MANUFACTURERS CODE: 81025
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.018 INCHES NOMINAL
OUTSIDE DIAMETER: 0.750 INCHES NOMINAL
OVERALL HEIGHT: 0.022 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
TA242
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960059
NSN
5310-00-596-0059
MFG
AMERICAN AIR FILTER CO INC DEFENSE PRODUCTS GROUP
Description
DESIGN CONTROL REFERENCE: TA242
HOLE DIAMETER: 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
III END ITEM IDENTIFICATION: W/S: AIRCRAFT, AWACS, E-3A; SUPPORT EQUIPMENT, C-5 AIRCRAFT
MANUFACTURERS CODE: 05496
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS: 0.050 INCHES NOMINAL
OUTSIDE DIAMETER: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
OVERALL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
TA242
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960059
NSN
5310-00-596-0059
MFG
ENGINEERED AIR SYSTEMS INC. DBA DRS SUSTAINMENT SYSTEMS
Description
DESIGN CONTROL REFERENCE: TA242
HOLE DIAMETER: 0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM
III END ITEM IDENTIFICATION: W/S: AIRCRAFT, AWACS, E-3A; SUPPORT EQUIPMENT, C-5 AIRCRAFT
MANUFACTURERS CODE: 05496
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL THICKNESS: 0.050 INCHES NOMINAL
OUTSIDE DIAMETER: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM
OVERALL HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
11367
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960067
NSN
5310-00-596-0067
MFG
MOOG INC.
Description
DESIGN CONTROL REFERENCE: 11367
HARDNESS RATING: 70.0 ROCKWELL A MINIMUM
HOLE DIAMETER: 0.690 INCHES NOMINAL
MANUFACTURERS CODE: 94697
MATERIAL: STEEL COMP 301 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND 3/4 HARD OR COND H FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.188 INCHES NOMINAL
OVERALL HEIGHT: 0.125 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
11367
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960067
NSN
5310-00-596-0067
MFG
MOOG INC.
Description
DESIGN CONTROL REFERENCE: 11367
HARDNESS RATING: 70.0 ROCKWELL A MINIMUM
HOLE DIAMETER: 0.690 INCHES NOMINAL
MANUFACTURERS CODE: 94697
MATERIAL: STEEL COMP 301 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND 3/4 HARD OR COND H FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.188 INCHES NOMINAL
OVERALL HEIGHT: 0.125 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
11367
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960067
NSN
5310-00-596-0067
MFG
E-SYSTEMS INC MONTEK DIV FLUID CONTROLS OPNS
Description
DESIGN CONTROL REFERENCE: 11367
HARDNESS RATING: 70.0 ROCKWELL A MINIMUM
HOLE DIAMETER: 0.690 INCHES NOMINAL
MANUFACTURERS CODE: 94697
MATERIAL: STEEL COMP 301 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COND 3/4 HARD OR COND H FED SPEC ALL MATERIAL RESPONSES OVERALL
MATERIAL THICKNESS: 0.024 INCHES MINIMUM AND 0.025 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.188 INCHES NOMINAL
OVERALL HEIGHT: 0.125 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
Related Searches:
310-4714-00
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960079
NSN
5310-00-596-0079
MFG
CARDWELL CONDENSER CORP LAPOINTE-ADMIRAL DIV
Description
HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
OVERALL HEIGHT: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
310-4714-000
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960079
NSN
5310-00-596-0079
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
OVERALL HEIGHT: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
310-4714-000
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960079
NSN
5310-00-596-0079
MFG
WROUGHT WASHER MFG INC
Description
HOLE DIAMETER: 0.250 INCHES MINIMUM AND 0.281 INCHES MAXIMUM
MATERIAL: COPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.005 INCHES MINIMUM AND 0.015 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.484 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
OVERALL HEIGHT: 0.047 INCHES MINIMUM AND 0.078 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
6735247
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960088
NSN
5310-00-596-0088
MFG
ROLLS-ROYCE CORPORATION
Description
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HOLE DIAMETER: 0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
MATERIAL: STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.656 INCHES NOMINAL
OVERALL HEIGHT: 0.094 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
6735247
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960088
NSN
5310-00-596-0088
MFG
GENERAL MOTORS CORP
Description
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HOLE DIAMETER: 0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
MATERIAL: STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.656 INCHES NOMINAL
OVERALL HEIGHT: 0.094 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
6735247
WASHER,SPRING TENSION
NSN, MFG P/N
5310005960088
NSN
5310-00-596-0088
MFG
ALLISON TRANSMISSION INC. DBA ALLISON TRANSMISSION DIV ALLISON TRANSMISSION
Description
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HOLE DIAMETER: 0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
MATERIAL: STEEL COMP 4130 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6350 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.029 INCHES MINIMUM AND 0.035 INCHES MAXIMUM
OUTSIDE DIAMETER: 0.656 INCHES NOMINAL
OVERALL HEIGHT: 0.094 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL